- Shop by Brand
- Shop by Category
- OEM Parts
- Blog
- About
- Shop by Brand
- Shop by Category
- OEM Parts
- Blog
- About
KW HLS: Hydraulic Lift System
HLS is available in two configurations, HLS 2 which is fitted on the front axles only or HLS 4 which can be attached to the front and rear axles and allows lifting of the entire vehicle. The hydraulic cylinder unit is located on the coilover body between the spring perch and spring. This allows for a mechanical advantage as there is no compression of the extended cylinder unit resulting in no unwanted additional suspension movement while driving.
– Allows cars with low ground clearance to clear obstacles more easily.
– Available as a complete kit including coilovers or as a conversion for existing coilover kit owners.
– Can be activated from inside the vehicle via a LED position control switch or by optional remote, eliminating any need to interior wiring.
– Can be activated while driving (up to 50mph)
* Fast lifting – Maximum lift in 5 seconds with HLS 2
KW HLS2 Porsche 911 (997) Upgrade
Lowering
Front Lowering: 0.8″ to 1.8″
Rear Lowering: 0.8″ to 1.8″
Notes
37: Vehicles equipped with electronic damper control: Electronic damper control needs to be disabled. Disable modules available through KW. Please check KW accessories list.
78: If vehicle is equipped with PASM, it needs to be disabled.
b: The battery has to be modified for vehicles with factory battery longer than 278mm. We recommend Varta Silver Dynamic 77Ah or Bosch S5 77Ah (not included in kit)
HLS2UKW: HLS2 (Front Axle Lift System) – Upgrade for existing KW coilovers
Weight | 40 lbs |
---|---|
Dimensions | 30 × 16 × 5 in |