VR Tuned ECU Flash Tune Porsche 991 GT3 RS 4.0L 500hp 2016

Description

VR Tuned ECU Flash Tune Porsche 991 GT3 RS 4.0L 500hp 2016

Description Additional information Reviews (0)
The 991 GT3RS is the first GT3 variant that does not come in a manual transmission, but with the PDK, it is still one incredible street/track car. As you rev past 2000 rpms, the exquisit sound coming from the back of the car is a like a symphony of horses ready to trample anything in its path. Jumping up from the previous 997.2 3.8L GT3RS, the 991 GT3RS shifts in milliseconds while it delivers 500 horsepower at 8250 rpm’s. The VR Tuned ECU flash was developed to focus on improving the cars entire power curve. With our Stage 1 calibration, the throttle response is much quicker and the low end torque comes to life faster. The PDK transmission is controlled seperately, but you will notice the gears hitting harder and faster with the increase in torque. With this flash you can expect to see your lap times improve with faster corner exit speed, top speed, and improved driveability.

Crank Horsepower Ratings:
– Stock Power: 500HP | 339FT/LBs
– Tuned Power: 525HP | 365FT/LBs

What are the benefits of VR Tuned?
– #1 priority is our customer service to you!
– Our tuning is used worldwide. We have powered vehicles of all types.
– All ECU tunes can be reverted back to stock if necessary.
– With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
– Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
– We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
– Other custom enhancements are available if requested and applicable.
– We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?
– Use the DimSport handheld device. You can flash between the stock and tuned at anytime. See Instructions Here.
– Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port.
– We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then overnight it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Options: (Extra Costs Not Listed. Contact for Prices):
– Choose to receive our additional ECO Mode file to help fuel economy when needed. This can be flashed via the OBDII port the same way as your tuned file. When you select this add on, you can easily flash between the files at your convenience.

For reference, this ECU is a Bosch MED17.1.1